Description
CFA push cylinders are all made of high-tensile aluminium providing an excellent service life in low cycle applications. They have an outstanding power to weight ratio – weighing approximately 50% less than steel cylinders. The cylinder tube and piston are hard anodised for extended protection against wear and corrosion. CFA push cylinders are delivered with a top lip and a protective bottom plate of steel, all to warrant proper function even if the base and lifting points are rough.
- 24-95 ton capacity.
- 100-200 mm stroke length.
- Anodised cylinder and piston for increased wear and corrosion protection.
Couplings
All REHOBOT cylinders can be provided with either a push-to-connect (male coupling half, AQU8) or a screw-to-connect (female coupling half, AQI24). Please contact us for further information.
Note! The REHOBOT range of aluminium cylinders are designed to be used in intermittent and in low-cycle applications such as normal maintenance and lifting operations. These aluminium cylinders are designed to provide a lifetime of at least 5,000 cycles and therefore should NOT be used in high-cycle operations like production lines etc. Use of these push cylinders beyond their rated life can lead to sudden failure without warning and could cause property damage, injury, or death.
