
The AES hi1.5 is a superior substitute to autogenous or LPG flame based heating methods in your workshop, it is particularly useful for applications with screwed joints in vehicles, cases, bearings, hubs etc.
The AES hi1.5 is a superior substitute to autogenous or LPG flame based heating methods in your workshop, it is particularly useful for applications with screwed joints in vehicles, cases, bearings, hubs etc.
AES hi1.5 Features
AES hi1.5 is used for sheet metal straightening and loosening of smaller machine parts such as:
The AES hi1.5 inductor will heat a M12 bolt or a nut to a temperature over 800°C in only 15 sec. The preparation and setup time for an induction heating system is much faster compared to an autogenous burner system. Simply connect the AES hi1.5 to a 230V socket, install the appropriate coil type onto the part you wish to heat, then push the ON/OFF button to begin the induction process. The heating process is accomplished in seconds, even for parts requiring red hot temperatures. Induction coils may be easily replaced with bigger or smaller ones. The same applies to the heating coil to be wrapped around the part. A set of coils of various diameters may be ordered as optional items together with the induction heater.
Advantages
Model Names
AES hi1.5 | Details |
---|---|
Mains supply: | 230 V, 50/60 Hz |
Working frequency: | 25-60 kHz |
Output power – induction power: | 1.5 kW |
Cooling system: | Fan |
Continuous operating time: | 5 minutes* |
Cable Length | 70cm |
Weight: | 4.5 kg |
Size (L×W×H): | 200x140x75 mm |